cod. 97843 / 97844 / 97846
24
6. When the engine is running and idling, the throttle lever on handle is as below picture.
First press the lock off lever and then switch the throttle lever on, the machine will be working.
7. If use Nylon cutter, before cutting, need to bump it to feed line firstly.
8. If any problem occurs, press the engine switch, the machine will stop running.
If you need stop cutting head working, release the throttle lever.
9. If any problem occurs, pull the pin of safety belt, then release the brush cutter immediately.
To Next Page
Loading...
