Parachute Outpost - Assembly Instructions Step 2

2
4 / 7
Assembly Instructions
B7
B9
B10
B11
A5
A6
A1
A2
B3
B5
B6
B7
Now that you have the outline of the frame constructed, attach both the left and right rails to the headboard
by aligning the designated holes and layering a flat washer onto a spring washer (B5, B6). From there, you’ll
be able to tighten the allen bolts (B3) into place and complete the top portion. Repeat this step to connect
the footboard to the bottom of the left and right rails.
3
Assemble the center base by connecting the support rail to the three support legs. Layer a spring washer
onto a flat washer (B10,B11) before securing and tightening the designated allen bolts (B9).