What to do if my Paradigm Founder has no sound?
If your Paradigm Stereo System isn't producing any sound, ensure the receiver, preamp, or amplifier is plugged in and turned on. Verify that the power outlet is working. Also, check if headphones are plugged in or if the system is on mute. Finally, re-check all connections.
How to fix lack of bass or dislocated image on Paradigm Stereo System?
A lack of bass or a dislocated image in your Paradigm Stereo System could be due to one or more speakers being connected out of phase (reversed polarity). Re-check the speaker cable connections, ensuring that each speaker's cable is connected with the correct polarity: red (+) to red (+) and black (-) to black (-).
Allow speakers to play for several hours before critical listening for optimal sound quality.
Instructions for cleaning speaker finishes using a damp soft cloth and avoiding wet objects.
Explains amplifier distortion as the primary cause of speaker damage from overdriving.
Discusses how more powerful amplifiers can provide cleaner power and reduce speaker damage risk.
Clarifies that volume control adjusts listening level, not output power; power usage varies with music.
Advises caution with loud levels, bass/treble controls, and monitoring woofer excursion.
Guides on selecting amplifier power based on speaker ratings for optimal sound and safety.
Discusses how room construction, dimensions, and furnishings affect speaker sound quality.
Advises placing front speakers so high-frequency drivers are at ear level for natural sound.
Recommends positioning speakers away from walls to avoid bass emphasis and improve clarity.
Guides on speaker placement distance and toe-in for best imaging and soundstage.
Explains the benefits of ARC for optimizing speaker performance based on room acoustics.
Details the process of ARC, including test signals, measurements, and calibration.
Lists ARC kit components, prerequisites, and software installation steps.
Details correct microphone placement, connection, and how to pair speakers for ARC.
Recommends measuring at multiple listening positions and using Quick Measure for optimization.
Guides through basic ARC measurements and points advanced users to customization resources.
Provides a chart detailing minimum speaker cable gauge requirements based on length for optimal sound.
Explains the standard method for connecting speakers with two input terminals using jumper bars.
Describes bi-wiring and bi-amping by removing jumper bars for improved clarity and detail.
Explains passive, horizontal, and vertical bi-amplification for different performance benefits.
Provides contact information for Paradigm customer support via website and email for assistance.
Lists steps to resolve no sound issues, checking connections, power, and mute settings.
Outlines checks for sound issues in specific speakers, including balance and power.
Addresses issues with bass or imaging by checking speaker polarity and cable connections.
Technical specifications for Founder 120H and 100F speaker models.
Technical specifications for Founder 80F, 90C, and 70LCR speaker models.
Technical specifications for the Founder 40B bookshelf speaker model.
Outlines conditions that limit the warranty coverage and its start date.
Lists specific actions or conditions that will void the product warranty.
Details the owner's duties regarding care, maintenance, and proof of purchase for warranty claims.
General| Series | Founder Series |
|---|---|
| Category | Stereo System |
| Manufacturer | Paradigm |
| Speaker Type | Floorstanding |
| Impedance | 8 ohms |
| Tweeter | 1" (25mm) AL-MAC™ High-Frequency Driver with Oblique Angled Lens (OAL™) Technology |
To Next Page
