29
w w w . p a r a d i g m . c o m
* DIN 45 500 Indicates -3 dB in a typical listening room.
† With typical program source, provided the amplifier clips no more than 10% of the time.
** Heights include base (plinth) and rubber feet. Add approximately 3/4” (2.0 cm) to cabinet height with
spikes installed. Add approximately 3/4” (2.0 cm) to cabinet depth with grill installed.
SURROUND 1
SURROUND 3
Design
Crossover
High-Frequency Driver
Midrange Drivers
Bass / Midrange Drivers
Bass Drivers
Low-Frequency Extension*
Frequency Response:
Sensitivity –
Room / Anechoic
Suitable Amplifier Power
Maximum Input Power
†
Impedance
Dimensions** (h x w x d)
Weight (unpacked)
Finishes
4-driver, 2-way bi-directional
surround/rear
2nd-order electro-acoustic
at 2.0 kHz
Two 25-mm (1 in) S-PAL
™
pure-
aluminum dome tweeters,
ferro-fluid cooled and damped
N/A
Two 110-mm (4-1/2 in) M-ICP
™
minimum-mass injection-molded
co-polymer polypropylene cones,
25-mm (1 in) voice-coils, oversize
ceramic / ferrite magnets, steel
chassis
N/A
71 Hz
±2 dB from 120 Hz – 20 kHz
(bi-directional soundfield)
88 dB / 85 dB
15 – 100 watts
80 watts
Compatible with 8 ohms
21.7 cm x 23.5 cm x 13.0 cm
8-1/2 in x 9-1/4 in x 5-1/8 in
3.28 kg / 7.25 lb per speaker
Black
4-driver, 2-way bi-directional
surround/rear
2nd-order electro-acoustic
at 2.3 kHz
Two 25-mm (1 in) S-PAL
™
pure-
aluminum dome tweeters,
ferro-fluid cooled and damped
N/A
Two 140-mm (5-1/2 in) S-PAL
™
satin-anodized pure-aluminum
cones, 25-mm (1 in) high-
temperature voice-coils, oversize
ceramic / ferrite magnets, GRIP
™
glass-reinforced injection-molded
polymer chassis
N/A
53 Hz
±2 dB from 90 Hz – 20 kHz
(bi-directional soundfield)
90 dB / 87 dB
15 – 175 watts
120 watts
Compatible with 8 ohms
27.0 cm x 33.0 cm x 16.8 cm
10-5/8 in x 13 in x 6-5/8 in
6.32 kg / 13.95 lb per speaker
Black
To Next Page
Loading...
