What to do if my Paradigm speakers have no sound?
If your Paradigm speakers aren't producing any sound, ensure that the receiver, preamp, or amplifier is plugged in and powered on. Verify that the power outlet at the wall is working correctly. Also, check if headphones are plugged in or if the system is on mute. Finally, re-check all connections to ensure they are secure.
Why is there a lack of bass or dislocated image in my Paradigm PERSONA 9H Speakers?
A lack of bass or dislocated image from your Paradigm speakers could be due to one or more speakers being connected out of phase (reversed polarity). To fix this, re-check that each speaker’s cable is connected with the correct polarity: red (+) to red (+) and black (-) to black (-).
Explanation of how amplifier distortion can damage speakers and how to avoid it.
How to make a standard connection using the speaker's input terminals.
Procedure and benefits of using bi-wiring for improved speaker performance.
Procedure and considerations for bi-amping speakers for enhanced audio quality.
Functionality of the ARC (Anthem Room Correction) on/off toggle switch.
Explanation of the benefits and purpose of using ARC for room acoustics.
Overview of the process by which ARC analyzes room acoustics and applies corrections.
Proper placement and connection of the microphone for ARC measurements.
Recommended procedure for conducting room acoustic measurements with ARC.
Steps for performing a basic room measurement and correction using ARC.
To Next Page
General