PRIORITY
INSTALLER CODE: 1 [0][0] [0][1] [0][2] 000000
MASTER CODE: 2 [1] Arm, Disarm, Bypass, Away, Stay, 010101
Master and User code programming
USER CODE #1: 3 [2] Arm, Disarm, Bypass, Away, Stay
USER CODE #2: 3 [3] Arm, Disarm, Bypass, Away, Stay
USER CODE #3: 3 [4] Arm, Disarm, Bypass, Away, Stay
USER CODE #4: 4 [5] Arm, Disarm
USER CODE #5: 4 [6] Arm, Disarm
USER CODE #6: 4 [7] Arm, Disarm
USER CODE #7: 5 [8] Arm ONLY
Fire alarms: (Zone #7)
During a fire alarm, the alarm output generates an intermittent alarm sig-
nal. Fire alarm reset conditions are the same as 24 hour zone reset.
The fire alarm siren will shut off automatically after the programmed
alarm duration time . Fire alarm will be recorded in memory and dis-
played as zone #7.
Panic alarms:
Pressing keys [1] and [3] simultaneously for 1 second gene-
rates a panic alarm. Panic alarms will be recorded in memory
but will not be displayed on the keypad.
TROUBLE DISPLAY [TRBL]
AC power failure is communicated to the system user by the illu-
mination of the keypad [TRBL] indicator.
KEYPAD ILLUMINATION LEVEL ADJUSTMENT
Pressing on the [MEM] key for 2 seconds changes it to a keypad
illumination “hot” key. A change in keypad illumination will be
apparent, and by pressing on the [MEM] key again, the level can
be adjusted from low, medium to high, or turned off as required.
After the desired level is selected, press [ENTER] or [CLEAR] to
save the setting in the keypad memory.
IMPORTANT: Although this control panel is compatible with most
security products available, we highly recommend that the
ESPRIT 727 be used in combination with PARADOX motion and
glassbreak detectors. This will ensure that your security system
operates at maximum effectiveness.
WARRANTY
Warranty conditions for the Esprit 727 may vary from country to
country. Please consult your local dealer for complete warranty
information. In all cases, the warranty does not cover malfunc-
tions arising from installer error or failure to follow
installation/operation instructions, nor does it apply to damages
due to causes beyond the control of Paradox Security Systems,
such as lightning, excessive voltage, mechanical shock or water
damage.
LIABILITY
Under no circumstances shall Paradox Security Systems be held
liable for any direct or indirect damages, loss of anticipated prof-
its, loss of time or any other losses incurred by the buyer in con-
nection with the purchase, installation, operation or failure of this
product.
WARNING
This security system should undergo frequent testing. However,
despite regular testing, and due to, but not limited to, criminal
tampering or electrical disruption, it is possible for this product
to fail to perform as expected.
Technical Support Fax: (514) 491-3284
PARADOX SECURITY SYSTEMS Fax: (514) 491-2313
780 Industrial Blvd, St Eustache, Quebec, Canada J7R 5V3
5
FUNCTION ADDRESS + DATA DEFAULT
FEATURE ADDRESS + DATA
ESPRIT 727 PROGRAMMING REFERENCE
To Next Page
Loading...
Need help?
General
