Need help?Do you have a question about the Paradox Magellan MG5000 and is the answer not in the manual?
General| Partitions | 2 |
|---|---|
| Keypads | Up to 8 keypads |
| PGMs | 4 programmable outputs |
| Remotes | Up to 32 remotes |
| Wireless Sirens | Yes |
| StayD Mode | Yes |
| Outputs | 4 programmable outputs |
| Battery Backup | 7Ah rechargeable battery |
| Dimensions | 345 x 305 x 85 mm |
Details on system and partition master codes and their functions.
Step-by-step guide to add or modify system users and assign remotes.
Explains trouble codes, their meanings, and troubleshooting steps.
Explains how StayD mode simplifies arming and provides continuous protection.
Steps to turn StayD mode on/off and change arming levels.
How to arm the system for full protection.
How to arm the system providing higher protection for sleeping areas.
How to arm the perimeter while allowing movement inside.
How to temporarily disable zones when arming the system.
Arming the system without a user code via dedicated keys.
How alarms are indicated on the keypad and stored in memory.
Procedure to disarm the system and stop an active alarm.
How to trigger panic alarms for police, medical, or fire emergencies.
What to do during a fire alarm, including delayed zones.
Using the IP100 module for remote monitoring and control via the internet.
Using the PCS100 GSM module for SMS notifications and control.
Configuring the system to send text messages for events.
Format for sending text messages to arm/disarm the system.
To Next Page
