Need help?Do you have a question about the Paradox Magellan MG5050 and is the answer not in the manual?
General| Partitions | 2 |
|---|---|
| User Codes | 32 |
| Event Buffer | 256 |
| Built-in Transceiver | Yes |
| Remote Control | Yes |
| Wireless Keypads | Yes |
| StayD Mode | Yes |
| Remotes | Up to 32 |
| Power Supply | 16.5 VAC |
| Zones | 32 |
| Battery Backup | 7Ah |
Details Installer, Maintenance, Master codes and panel reset procedures.
Programming of system codes and user access/feature options.
How zones are identified and assigned for MG and SP series panels.
Explains zone behavior, partition assignment, and additional options.
Assigning zone numbers and entry points to keypads.
System-wide settings, panic alarms, and arming/disarming configurations.
Configuring response times for zones and system events.
Configuring dialer, TLM, and auto-test report settings.
Selecting protocols and entering monitoring station account details.
Programming phone numbers for communication and pagers.
Defining events that trigger programmable outputs.
Methods for setting report codes and zone-specific codes.
Overview of system troubles and access to installer functions.
Wiring for fire circuits and AC power/battery.
Step-by-step guide for updating system firmware via WinLoad.
Important limitations and disclaimers regarding alarm system performance.
Guidelines for UL/ULC compliance during installation and configuration.
To Next Page