Paradox Magellan MG5050 User Manual

Magellan / Spectra SP 66
Walk Test Mode
Installer and Maintenance Codes
WinLoad
Monitoring Phone #
Step Action Details
1
+ [
INSTALLER CODE] = flash. [MAINTENANCE CODE] may also be used.
2
3 [6] Activates or deactivates Walk Test Mode.
Step Action Details
1
+ [
INSTALLER CODE] = flash.
2
3 [7] = Installer Code
[8] = Maintenance Code
4 [
CODE]* Enter 4- or 6-digit code.* To erase a code, press the [SLEEP] key for 3 seconds.
5 [
CONFIRM CODE] Re-enter 4- or 6-digit code.
Step Action Details
1
+ [
INSTALLER CODE] = flash.
2
3 [9]
4 [
PHONE #] + [ENTER]* Enter PC phone # (up to 32 digits) and press [ENTER].* To erase WinLoad phone #, panel
ID, and PC password, press the [SLEEP] key for 3 seconds.
5 [
PANEL ID] Enter 4-digit Panel ID
6 [
PC PASSWORD] Enter 4-digit PC Password
Step Action Details
1
+ [
INSTALLER CODE] = flash.
2
3 [1]
4 [
PHONE #] + [ENTER]* Enter monitoring station phone # (up to 32 digits) and press [ENTER].* To erase monitoring
phone #, reporting format, and account #s, press the [SLEEP] key for 3 seconds.
5 [
PARTITION 1 ACCOUNT #]
6 [1] = CID
[2] = SIA
7 [P
ARTITION 2 ACCOUNT #]

Paradox Magellan MG5050 Specifications

General

Partitions	2
User Codes	32
Event Buffer	256
Built-in Transceiver	Yes
Remote Control	Yes
Wireless Keypads	Yes
StayD Mode	Yes
Remotes	Up to 32
Power Supply	16.5 VAC
Zones	32
Battery Backup	7Ah