21 Programming Guide
Daylight Savings Programming
Customized Daylight Saving Programming
In addition to using the default Daylight Saving Time (DST) settings in section [731], you can also set a customized DST. Set section
[732] for the DST starting period and [733] for the DST ending period. Both sections recognize 5 different entries of 2 digits each. All
entries must be assigned in this respective order:
If you have modified sections [732] and [733] but want to revert to a standard DST code, change all of the settings in [732] and [733] to
(00)
[730] General Zone Options 3 OFF ON
Option
[1] Daylight savings
N Disabled N Enabled
[2] N/A N/A N/A
Section Data Description
[ 73 1 ] (00 to 99) Country code
Country Code List
00 = US, Canada, Mexico, St.Johns, Bahamas, Turks and Caicos
01 = Cuba
02 = Brazil
03 = Chile
04 = Falklands
05 = Paraguay
06 = European Union, UK, and Greenland
07 = Russia and most states of the former USSR
08 = Australia- South Australia, Victoria, Australian Capital
Territory, New South Wales
09 = Lord Howe Island- Tasmania
10 = New Zealand, Chatham
11 = Tonga
12 = Iraq and Syria
13 = Israel
14 = Lebanon, Kirgizstan
15 = Palestine
16 = Egypt
17 = Namibia
18 = USA, Canada (New Daylight Saving Time for 2007)
19 = New Zealand (New Daylight Saving Time for 2007)
Months 01 to 12 01 = January
*If the Day value is set to (00), the Day is ignored and the DST
change will respect only the Date value.
** If the Day setting is set to a value other than 00 (e.g. 03 -
Tuesday), the DST time change will occur on the first 'Tuesday'
following the programmed Date value.
Date 01 to 31 01 = First day of the month
Day** 00 to 07 00 = Default*, 01 = Sunday
Hours 00 to 23 00 = Midnight
Minutes 00 only 00 = 60 minutes or 1 hour
Section Data Description
[ 73 2 ] __/__/__/__/__/__/__/__/__/__/ Daylight Savings Time Starting Period
[733] __/__/__/__/__/__/__/__/__/__/ Daylight Savings Time Ending Period
To Next Page
Loading...
Need help?
General
