Paradox Magellan MG5000 User Manual

16 User Guide
Figure 1: Arming / Disarming
Auto-Arming
Timed Auto Arming
The alarm system can automatically arm itself at a specified time every day. As with Regular arming (see
Regular Arming on page 14), the system will bypass any open zones.
No Movement Auto Arming
The alarm system can be programmed to arm the system and/or send a report to your monitoring station if no
zone activity occurs for a pre-programmed amount of time. This is a particularly useful feature when supervising
an individual with chronic health problems or for a person who lives alone. The system will bypass any open
zones.
Display Mode
The K32RF has two display modes. By default, the keypad will show all events (e.g. zones in alarm, bypassed
zones, etc.) live as they occur. Alternatively, the system can be programmed by your installer to only display
zones that cause an alarm or entry delay. If you want to see the status of all zones, press the [] key. Zones that
are open but have not triggered an alarm will only be displayed after pressing the [] key. The information will
be displayed for 30 seconds (20 seconds for K37), showing the status of all zones at the time the [] key was
pressed. The zone display will shut off after 30 seconds (20 seconds for K37). For more information on the two
display modes, contact your installer.
How do I program the Auto-Arm Timer?
1
Press the [] key.
2Enter [
MASTER CODE].
3Press the [
BYP] key. The [BYP] key will flash.
4Press key [1] to set partition 1, or press key [2] to set partition 2.
5Enter the desired time for auto arm (24 hour clock, e.g. 18:30).
6Press key [1] to regular arm, key [2] to sleep arm, or key [3] to stay arm the partition.
How do I temporarily disable the Auto-Arm Timer?
1
Press the [] key.
2Enter [
MASTER CODE].
3Press the [
BYP] key. The [BYP] key will flash.
4Press key [1] to set partition 1, or press key [2] to set partition 2.
5Press and hold [
SLEEP] to temporarily disable the Auto-Arm Timer.
ARM
SLEEP
STAY
OFF
No Code
No Code
No Code
To Dis ar m:
[
OFF] + Code
To S lee p Ar m:
[SLEEP] + Code
No Code
To D isa r m:
[
OFF] + Code
To Stay Ar m :
[
STAY] + Code
To Dis ar m:
[
OFF] + Code

Paradox Magellan MG5000 Specifications

General

Brand	Paradox
Model	Magellan MG5000
Category	Security System
Language	English