Need help?Do you have a question about the Paradox Digiplex DGP2-640 and is the answer not in the manual?
General| Model | DGP2-640 |
|---|---|
| Type | Security System |
| Zones | 64 |
| Keypads | Up to 8 |
| Event Log | Up to 1000 events |
| Partitions | 8 |
| PGMs | 8 |
| Communication | GSM |
Explains warning/note icons and data entry notation for the keypad.
Describes keypad action keys and their specific functions for system control.
Details the meaning of various indicator lights displayed on the keypad.
Explains the icons displayed on the keypad screen for system status.
Describes the beep tones used by the keypad for confirmation and errors.
Describes the confidential mode feature of the keypad for hiding system status.
Explains the feature allowing multiple actions without re-entering access codes.
Details how to adjust LCD screen illumination, scroll speed, and contrast.
Explains how to view the status of different areas in a partitioned system.
Describes how the keypad displays the status of individual zones.
Explains the timer allowing users to exit before the system arms.
Details the standard procedure for arming the security system.
Describes how to arm the system while remaining in the protected area.
Explains arming the system with immediate alarm triggering for all zones.
Details arming the system with open zones that will be armed later.
Explains how to use programmed keys for quick system arming functions.
Describes arming the system using a keyswitch.
Details setting a specific time for automatic system arming.
Explains automatic arming based on lack of activity.
Describes how to temporarily disable specific zones.
Explains how to re-bypass zones from the previous armed period.
Explains the delay allowing entry before an alarm is triggered.
Details the procedure for disarming a currently armed system.
Explains how to view recorded alarms from the last armed period.
Describes the master code for system administration and its default value.
Explains how to program and manage user access codes for the system.
Details the steps to remove existing user access codes from the system.
Describes the feature that locks the keypad after invalid code entries.
Lists system-related trouble conditions like AC failure and battery issues.
Lists communicator troubles like TLM1 and communication failures.
Describes troubles related to zone tampering and wiring faults.
Explains low battery issues for wireless devices and clock reset troubles.
Explains programmable outputs triggered by system events.
Describes how to trigger emergency alarms for police, medical, or fire.
Details how to designate a zone to beep when opened.
Explains how to set specific hours for chime zone activation.
Instructions for setting the system's time and date.
Describes how the system responds to a standard fire zone alarm.
Explains the behavior of delayed fire zones and alarm reporting.
Provides general safety advice in case of fire.
Offers tips to prevent common household fires.
Describes the system's response to a burglar alarm.
Details the procedure for testing burglar alarm functionality.
Advises against using open flames for fire alarm testing.
Discusses routine maintenance, like battery replacement.
Explains how to conduct a system test with the monitoring station.
To Next Page
