26 User Guide
8.0.1 Group [1]: System
Trouble [1]: AC Failure
Indicates that your system is running on the backup battery. The AC
light on your keypad will be turned off during a power failure. If this
trouble occurs when your establishment is not experiencing a power
failure, call your monitoring station for repairs.
Trouble [2]: Battery Trouble
Indicates that the backup battery is disconnected or needs to be
recharged or replaced.
Trouble [3]: AUX Current Limit
Indicates that devices connected to the system have exceeded
current limits. The auxiliary output will shut down until the troubled
has been rectified.
Trouble [4]: Bell Current Limit
Indicates that the bell or siren connected to the system has exceeded
current limits. The bell/siren output will shut down until the trouble is
rectified.
Trouble [5]: Bell Absent
Indicates that the system has detected that the bell or siren is not
connected.
8.0.2 Group [2]: Communicator
Trouble [1]: TLM1
The control panel is unable to access the main telephone line.
Troubles [2] to [5]: Fail to Communicate
The control panel tried all assigned telephone numbers and failed to
contact the monitoring station.
DGP2640_EU00.fm Page 26 Friday, April 8, 2005 11:28 AM
To Next Page
Loading...
