Need help?Do you have a question about the Paradox DGP2-641 and is the answer not in the manual?
General| Brand | Paradox |
|---|---|
| Model | DGP2-641 |
| Category | Security System |
| Language | English |
Describes connecting detectors or door contacts directly to the keypad's input terminal.
Provides step-by-step instructions to enter the Module Programming Mode via the control panel.
Details assigning keypads to partitions 1 through 8, with limitations for specific panels.
Assigns an access control door to one or more partitions in the alarm system.
Allows programming of door lock behavior to suit security requirements.
Enables unlocking the door when the REX device detects movement.
Sets the time a door remains unlatched after access or REX.
Determines hours, days, and holidays when a door remains unlocked without a card.
Programs how the system reacts to a door left open.
Enables an alarm if a door is not closed within a specified period after opening.
Sets the time a door can be open before triggering an Access Alarm.
Programs how the system reacts to a door opened without authorization.
Enables an alarm if a door is opened without a valid access signal.
Determines if PIN entry is on the keypad or a PosiPIN reader.
Steps to set the PosiPIN keypad communication format to 8-bit Wiegand.
To Next Page
