Digiplex/DigiplexNE LCD Keypad 35n
The DigiplexNE control panel has up to 8 partitions, 96 zones
and up to 999 user codes. The LCD keypad only allows you
to program the messages for up to 4 partitions, 48 zones and
96 user codes. The rest of the messages can be
programmed directly into the DigiplexNE control panel. Refer
to the DigiplexNE Reference & Installation Manual and to the
DigiplexNE Programming Guide for more details.
7.1 SPECIAL FUNCTION KEYS
[STAY] - Insert Space
Pressing the [
STAY] key inserts a blank space in the current cursor
position.
[
FORCE] - Delete
Pressing the [
FORCE] key will delete the character or blank space
found at the current cursor position.
[
ARM] - Delete Until the End
Pressing the [
ARM] key will delete all characters and spaces to the
right of the cursor and at the cursor's position.
[
DISARM] - Numeric Keys / Alphanumeric Keys
Every time the [
DISARM] key is pressed it will toggle numeric keys to
alphanumeric keys and vice versa. Numeric: Keys [0] to [9]
represent numbers 0 to 9
[BYP] - Lower Case / Upper Case
Every time the [
BYP] key is pressed it will toggle the case setting from
lower to upper case and vice versa.
[MEM] - Special Characters
After pressing the [
MEM] key, the cursor will turn into a flashing black
square. Using Table 2 on the following page, enter the 3-digit number
that represents the desired symbol.
To Next Page
Loading...
