4 Reference & Installation Manual
1.0 INTRODUCTION
Thank you for choosing Paradox
®
Security Systems. The Digiplex™/
DigiplexNE Security Systems are advanced technology security
systems that will provide reliable security protection and powerful
features that are easy to use. The elegant and user-friendly
Digiplex™/DigiplexNE LCD Keypad will allow easy access to the
security system's functions and information at the touch of a button.
Since all programming is accomplished through the keypad, please
read this manual carefully.
As well as normal security system functions, the Digiplex/DigiplexNE
Access Control LCD Keypad (DGP2-641AC) can also be used for
access control. Access Control is designed to monitor and control the
access for up to 32 designated doors without the need of an
additional control panel. The events that occur on an Access Control
door can be logged in the control panel’s Event Buffer and can be
viewed through the keypad.
Each door to become an Access Control door requires an Access
Control LCD Keypad (DGP2-641AC), a reader (suggestion: PosiProx
CR-R880-A or PosiPIN CR-R885-BL), a REX device (suggestion:
Paradoor 460), a door contact, and a locking device.
If desired, door contacts can also be assigned to zones in the control
panel to link the doors to the Digiplex/DigiplexNE Alarm system. This
will allow you to use the same door for the Access Control system
and the alarm system. Only two of the Access Control features
require that the Access Control door's door contact be assigned to a
zone: Burglar Alarm on Forced Door and Access to Armed Access
Control Doors (refer to the Digiplex or DigiplexNE Reference &
Installation Manual).
To Next Page
Loading...
Need help?
General
