22 Reference & Installation Manual
5.6 PGM ACTIVATION EVENT
SECTIONS [009] TO [012]
The PGM Activation Event determines which event will activate the
keypad's on-board PGM output. The
EVENT GROUP specifies the
event, the
FEATURE GROUP identifies the source, and the START # and
END # sets the range within the Feature Group. Use the PGM
Programming Table in the Digiplex/DigiplexNE Modules’
Programming Guide to program the keypad’s PGM Activation Event.
Enter the sections that correspond to the
EVENT GROUP, FEATURE
GROUP
, START # and END # of the PGM and enter the required data.
5.7 PGM DEACTIVATION EVENT
SECTIONS [013] TO [016]
If the PGM Deactivation Option (section 5.2 on page 20) is set to
follow the PGM Deactivation event, the PGM will return to its normal
state when the event programmed in sections [013] to [016] occurs.
The
EVENT GROUP specifies the event, the FEATURE GROUP identifies
the source, and the
START # and END # sets the range within the
Feature Group. Use the PGM Programming Table in the Digiplex/
DigiplexNE Modules’ Programming Guide to program the keypad’s
PGM Activation Event.
Enter the sections that correspond to the
EVENT GROUP, FEATURE
GROUP
, START # and END # of the PGM and enter the required data.
EVENT GROUP FEATURE GROUP START # END #
PGM [009] [010] [011] [012]
EVENT GROUP FEATURE GROUP START # END #
PGM [013] [014] [015] [016]
To Next Page
Loading...
