Digiplex/DigiplexNE LCD Keypad 27n
users will have access during the days programmed in the
control panel (refer to the Digiplex or DigiplexNE Reference &
Installation Manual).
Program the Start Time and End Time according to the 24-
hour clock within the same day. Use Feature Select
Programming to set the options representing the Days.
For example, program:
• Interval A: Start time 07:00, End time 16:00, Days M, T,
W, T, & F
• Interval B: Start time 10:00, End time 17:00, Days S, S,
& H
Then, the door will stay unlocked on Monday, Tuesday,
Wednesday, Thursday, and Friday between 7AM and 4PM and
on Saturday, Sunday, and Holidays between 10AM and 5PM.
Therefore, users will not have to present their Access Control
Cards during the Door Unlocked Schedule.
6.3.6 CARD ACTIVATES DOOR UNLOCKED SCHEDULE
SECTION [006]: OPTION [1]
When the Door Unlocked Schedule is programmed and this
option is enabled, the door is locked until the first valid Access
Control Card is presented. Once the door is unlocked, it will
remain unlocked until the end of the schedule.
For example: The schedule is 7AM to 5PM Monday to Friday,
option [1] is enabled, and a valid Access Control Card is
presented to the reader at 8AM on Monday. Although the
Option
Day
Option
Day
[1]
SUNDAY (S)
[5]
THURSDAY (T)
[2]
MONDAY (M)
[6]
FRIDAY (F)
[3]
TUESDAY (T)
[7]
SATURDAY (S)
[4]
WEDNESDAY (W)
[8]
HOLIDAYS (H)
To Next Page
Loading...
Need help?
General
