Need help?Do you have a question about the Paradox DGP2-641/BL and is the answer not in the manual?
Wiring wired input terminals to keypads for detectors or door contacts at entry points.
Details the on-board PGM output, its functionality, and current limit for connected devices.
Step-by-step guide to access programming mode using installer code and serial number.
Assigning each keypad to one or more partitions within the security system.
Activates reporting of tamper switch events to the control panel.
Sets the PGM output to function as either Normally Open or Normally Closed.
Defines how the PGM output deactivates: by event or by timer.
Configures specific events that will trigger the PGM output to activate.
Configures specific events that will cause the PGM output to deactivate.
To Next Page
General
