Digiplex LCD Keypad 9n
4.4 Display Entry Delay Timer
Section [003]: Option [3]
Based on the user's needs, an Entry Delay Timer will be
programmed to provide the user time to enter their user access
code before the alarm is triggered. The Entry Delay Timer's
countdown can be displayed on the LCD screen.
4.5 Confidential Mode
Section [003]: Options [4] and [5]
If the Confidential Mode is enabled and no actions are performed
on the keypad for a period of time, the LCD screen will appear as
shown in Figure 4.1 (page 10) and the “AC” and “STATUS” LED
will be off until either a button is pressed or an access code is
entered. The period of time in which no action is performed is
defined by the Confidential Mode Timer (005-255 seconds; refer
to section 4.6 on page 10). Confidential Mode is activated by
enabling option [4]. Option [5] regulates whether the LCD screen
will be activated at the touch of a button or only when an access
code is entered.
Once the LCD screen is activated (by code or button), Normal
Mode will appear and display the date and time as shown in
Figure 4.1 on page 10. The status of the areas, the open zones
for every area the keypad is assigned, the Alarm Memory
Display (if necessary) and the Trouble Display (if necessary. See
DGP-848 or DGP-NE96 User Manual) will also scroll on the LCD
screen.
Option [3] OFF= Will not display the Entry Delay Timer
(default)
Option [3] ON= LCD screen will display Entry Delay Timer
To Next Page
Loading...
Need help?
General
