Paradox K32LCD - User Manual

K32L-EQ03 12/2010
K32LCD/K32LX LCD Keypad
Quick Start
How to Arm
NOTE: To arm with StayD enabled, refer to the StayD
User Manual, available at paradox.com>StayD. To learn
more about StayD, contact your installer.
Arming When Exiting (Regular Arm)
To arm your system when exiting:
Arming When Staying (Stay/Sleep Arm)
To arm your system when staying:
Overview
K32LX shown
LCD (displays system
status and messages)
Arrow keys (use to scroll the
menu options)
Backlight settings
(press and hold)
Chime programming
(press and hold)
Quick menu programming
(press once + [
MASTER CODE])
AC light (ON = power ON;
OFF = power OFF)
StayD light (ON = StayD ON; OFF
= StayD OFF)
RX/TX logo (K32LX only)
Step Description
1. Close all zones in desired partition.
2. Press [ARM] and enter your [ACCESS CODE].
Step Description
1. Press [STAY] for Stay arming or [SLEEP] for
Sleep arming, and enter your [
ACCESS CODE].
2. Select the desired partition (1 or 2). For both,
press one, than the other after the beep.

Paradox K32LCD Specifications

General

Display	LCD
Zones	32
Backlight	Yes
StayD	Yes
Keypad Zones	1
Multiple Partitions	Yes
Tamper Switch	Yes
Communication	Wired
Power Supply	12 V DC
Compatibility	MG5000, MG5050
Operating Temperature	0°C to 50°C
Keypad Type	LCD

Summary

Keypad Overview

Quick Menu Programming

Initiates quick menu programming by pressing the [MASTER CODE].

AC Power Indicator

Indicates AC power status: ON for power ON, OFF for power OFF.

StayD Indicator Light

Shows StayD status: ON for StayD ON, OFF for StayD OFF.

RX;TX Communication Logo

Indicates RX/TX communication status (K32LX model only).

LCD Display Functionality

Displays system status and messages for user interaction.

Keypad Navigation Arrows

Used to scroll through menu options and system information.

Backlight Adjustment

Adjusts backlight settings by pressing and holding a key.

Chime Function Programming

Enables chime programming by pressing and holding a key.

Arming the System

Arming When Exiting (Regular)

Close all zones, press [ARM], and enter [ACCESS CODE].

Arming When Staying (Stay;Sleep)

Press [STAY] or [SLEEP], enter [ACCESS CODE]. Select partition(s).

Disarming the System

Disarming Upon Entry

Press [OFF], enter [ACCESS CODE], and select partition(s).

Panic Key Functions

Initiates silent or audible alarms via specific key combinations.

Alarm Memory Display

Disarm, press [MEM], use arrows to view breached zones, press [ENTER].

Trouble Display and Clearing

Viewing and Clearing Troubles

Press [TBL], scroll to view, follow instructions, press [CLEAR] to exit.

Bypassing Zones

Zone Bypassing Procedure

Press [BYP], enter [ACCESS CODE], select zone number, press [ENTER].