Paradox K32LCD+

K32LCD+-EQ00
Printed in Canada - 05/2014 PARADOX.COM
Quick Start
K32LCD+ Keypad
How To Arm
Arming When Exiting (Regular Arm)
To arm your system when exiting:
Note: To arm with StayD enabled, refer to the
StayD user manual, available at paradox.com. To
learn more about StayD, contact your installer.
Arming When Staying (Stay/Sleep Arm)
To arm your system when staying:
LCD (displays system
status and messages)
Arrow keys (use to scroll the
menu options)
AC light (ON = power ON;
OFF = power OFF)
StayD light (ON = StayD ON;
OFF= StayD Off
Chime programming
(press and hold)
Backlight settings
(press and hold)
Quick Menu Programming
(press once + [MASTER CODE]
Step Description
1. Close all zones in the desired partition.
2. Press [ARM] and enter your [ACCESS
CODE].
Step Description
1. Press [STAY] for stay arming or [SLEEP]
for sleep arming and then enter your
[ACCESS CODE].
2. Select the desired partition (1 or 2). For
both, press one, then the other after the
beep.
www.ealarm.com.my

Paradox K32LCD+ Specifications

General

Display	LCD
Zones	32
Backlight	Yes
Operating Voltage	12 VDC
Operating Temperature	0°C to 50°C
Communication	4-wire bus
Compatibility	Compatible with Paradox EVO, MG, and SP series

Summary

Quick Menu Programming

Keypad Status Indicators

Describes the AC and StayD lights indicating power and StayD status.

How To Arm

Arming When Exiting (Regular Arm)

Steps to arm the system when leaving the premises.

Arming When Staying (StaySleep Arm)

Steps to arm the system while staying inside.

How to Disarm

Panic Keys

Instructions for triggering panic alarms via key combinations.

Alarm Memory Display

How to view past alarms that occurred during the last armed period.

Trouble Display

How to Bypass Zones