9 User Guide
Arming & Disarming with StayD
StayD simplifies your life and makes it safer by protecting you 24 hours a day, 7 days a week without ever
having to disarm the system – even when entering an armed area. StayD lives with you and protects you at all
times, without any unprotected periods, and automatically re-arms the system so you don’t need to remember
to.
When entering/exiting a site, the system partly disarms to let you pass through: simply notify the system with
your remote and go through the designated path which will automatically re-arm after you pass. All other zones
remain armed. The result is a system that is always protecting, without the uncertainty of whether the system is
armed or not.
Other benefits of StayD include knowing when your kids are accessing potentially dangerous areas, such as the
balcony, pool or front door. Now you can truly have peace of mind knowing that you are always protected.
Consult your installer for more information.
To Turn On/Off StayD Mode
To turn on StayD mode:
[STAY] + [CODE] + [STAY] StayD light on
Press the [
STAY] key followed by a valid code, then press the [STAY] key again within ten seconds. The StayD
light will light up to confirm StayD activation, and the system will be in Stay mode.
To turn off StayD mode:
[OFF] + [CODE] + [OFF] Off light on
Press the [
OFF] key followed by a valid code, then press the [OFF] key again within ten seconds. The StayD light
will turn off and the Off light will light up to confirm StayD deactivation. With StayD disabled, the system will
function as a standard security system.
To Change Arm Mode
(see Arming & Disarming on page 10)
To change the level of security - Stay to Sleep:
[SLEEP] for 2 sec. Delay Sleep light on
Press and hold the [
SLEEP] key on any keypad. All zones which will be armed in Sleep mode go into exit delay,
allowing you to move to the bedroom. When the exit delay ends, and you are in the bedroom, the rest of the
interior will arm. The system is now in Sleep mode.
To change the level of security - Sleep to Stay:
[STAY] for 2 sec. Stay light on
Press and hold the [
STAY] key on the keypad located in the bedroom. The system will instantly switch from
Sleep to Stay mode, allowing you to leave the bedroom and move freely inside the house. If you accidentally
leave the bedroom without switching to Stay mode, all zones armed in Sleep mode will go into a delay, allowing
you enough time to switch to Stay mode.
Leaving the site - Stay to Full:
Keypad: [ARM] for 2 sec. Delay Arm light on
Press and hold the [
ARM] key on the keypad that the exit path is assigned to. This will start an exit delay period
for all zones in the exit path. After you have left the property, all exit path zones will rearm. The system is now in
Full mode.
Entering the site - Full to Stay:
Keypad: [CODE] Stay light on
When entering the property through the entry path, all zones assigned to the entry path will go into delay,
allowing you to enter the house. Entering a valid code on the keypad the entry path is assigned to ends the entry
delay and switches the system to Stay Arm mode. The entry path zones will rearm. The system is now in Stay
mode.
To Next Page
Loading...
