Need help?Do you have a question about the Paradox MG10LEDH and is the answer not in the manual?
General| Brand | Paradox |
|---|---|
| Model | MG10LEDH |
| Category | Control Panel |
| Language | English |
Procedures for managing user access and settings.
Configuration of entry and exit delay timers.
Setting the system's current time and date.
Instructions for system communication setup.
Sending a test report to the monitoring station.
Configuring automatic arming functions.
Procedure to remove lost or stolen remote controls.
Configuring various system operational settings.
Fundamental system operations and feedback mechanisms.
Instructions for activating and deactivating StayD mode.
How to switch between Sleep and Stay arming levels.
Special configurations and features within StayD mode.
Creating, modifying, and deleting user access codes.
Using a special code to signal distress silently.
Step-by-step guide to programming new access codes.
Step-by-step guide to removing existing access codes.
Instructions for standard system arming.
How to arm the system for partial occupancy.
How to arm the system while remaining inside.
Arming the system without an access code.
One-touch activation of Stay arming mode.
One-touch activation of Sleep arming mode.
Accessing bypass programming via one-touch.
Exiting premises while keeping the system armed.
Programming automatic arming at specific times.
Auto-arming based on lack of user activity.
Procedure for disarming an armed system.
Procedure for stopping an active alarm.
Steps to temporarily disable specific zones.
Restoring previously bypassed zone settings.
Options for how the keypad displays system status.
How alarms are indicated on the keypad.
System response and procedures for fire alarms.
Information on common causes of house fires.
General advice for fire safety and escape.
Recommendations for fire detector placement.
Activating silent or audible alarms for emergencies.
Enabling chime notifications for specific zones on MG32LED.
Enabling chime notifications for specific zones on MG10LEDV/H.
Adjusting backlight levels for MG32LED/MG32LRF keypads.
Adjusting backlight levels for MG10LEDV/H keypads.
Steps to view system trouble conditions.
Guide to resetting the system clock after timer loss.
Using special key combinations for quick access.
Procedures for testing system components and maintenance.
To Next Page