Paradox Esprit 728 Ultra User Manual

Esprit 728 Ultra & 738 Ultra - 1 - Programming Guide
System Programming Guide
Software Versions 5.0 (728ULT) and 5.0 (738ULT)
Installer Code (default - 728 Ultra: 282828; 738 Ultra: 383838)
Full access to programming, except user access codes (PINs). No access to arming/disarming. Use only numeric keys from [0] to [9].
Zone Recognition
Streamlined Section Programming
This is an alternate method to Hex Programming (see page 2). Addresses 000 to 043 and 300 to 527 are grouped into 68 sections where
each section contains four addresses (i.e. section 00 = addresses 000 to 003). Using this method allows you to program 8 digits
(4 addresses) without having to exit and re-enter addresses.
The keypad will not display the current data in the Streamlined Section Programming method.
Table 1: Zone Recognition
Device connected to which input? 728 Ultra
No ATZ
728 Ultra
With ATZ
738 Ultra
No ATZ
738 Ultra
With ATZ
Control Panel
Input 1 = Zone 1 Zones 1 & 2 Zone 1 Zones 1 & 9
Input 2 = Zone 2 Zones 3 & 4 Zone 2 Zones 2 & 10
Input 3 = Zone 3 Zones 5 & 6 Zone 3 Zones 3 & 11
Input 4 = Zone 4 Zones 7 & 8 Zone 4 Zones 4 & 12
Input 5 = N/A N/A Zone 5 Zones 5 & 13
Input 6 = N/A N/A Zone 6 Zones 6 & 14
Input 7 = N/A N/A Zone 7 Zones 7 & 15
Input 8 = N/A N/A Zone 8 Zones 8 & 16
Keypad
Zone 1 = Zone 5 Zone 9 Zone 9 Zone 17
Zone 2 = Zone 6 Zone 10 Zone 10 Zone 18
Table 2: Streamlined Section Programming Method
1. Press [
ENTER] + [INSTALLER CODE] (default - 728 Ultra: 282828; 738 Ultra: 383838) + [7].
2. The [
ENTER] and [2ND] keys will flash to indicate you are in programming mode (LED keypad only).
3. Enter 2-digit [
SECTION] (00 to 67).
4. The [ENTER] key will remain on while the [2ND] key will be off (LED keypad only).
5. Enter 8-digit [
DATA] to program the section.
6. The keypad will beep to indicate that the section has been programmed, data is saved and the
software has advanced to the next section.
7. Return to step 4 or press [
CLEAR] to exit programming mode.
&

Paradox Esprit 728 Ultra Specifications

General

Brand	Paradox
Model	Esprit 728 Ultra
Category	Control Panel
Language	English

Summary

Zone Recognition

Streamlined Section Programming

Keypad Trouble Display

Hex Programming

Installer / Panel Answer Options

Telephone and Account Numbers

Communicator Formats

Programmable Contact ID Event Codes

Reporting Codes

Arming (Closing) Report Codes

Defines report codes for arming events, associated with user codes.

Disarming (Opening) Report Codes

Defines report codes for disarming events, associated with user codes.

Alarm Report Codes For Zones

Alarm Restore Report Codes For Zones

Shutdown Report Codes

Tamper Report Codes

Trouble Report Codes

Trouble Restore Report Codes

Special Report Codes

Decimal Programming

Feature Select Programming

Code Priority For System 'A' / STAY

Defines priority for system arming codes 'A' (STAY).

Code Priority For System 'B' / AWAY / FORCE

Defines priority for system arming codes 'B' (AWAY/FORCE).

Code Priority for Codes with Bypass Access

Defines priority for user codes when accessing bypass functions.

Telephone Line Monitoring (TLM)

Reporting Options

Tamper / Wire Fault Definitions

Zone Definition

Key Access Programming

Installer Test Mode

Enables installer test mode with confirmation beeps and zone walk testing.

Auto Arming Time Program

Allows programming of auto-arm time using 2-digit hour and minute values.

Panel Time Programming

Sets the system's internal clock using 2-digit hour and minute values.

Test Report

Configures reporting of test events and requires telephone/account numbers.

Call Espload Via Telephone

Enables communication with Espload via telephone, requiring panel/PC programming.

Answer Espload

Supports Espload communication using the ADP-1 adapter with specific modem setup.

Cancel Communication Attempts

Allows Master/User Code 1 or Installer Code to cancel communications.

Connection Diagrams

Single Zone Connections

Wiring diagrams for different types of single zone detectors and configurations.

Advanced Technology Zone (ATZ) Connections

Other Connection Diagrams

Diagrams for connecting keypads and understanding keypad zone configurations.

728 Ultra Wiring Diagram

738 Ultra Wiring Diagram

Power Down Reset