Paradox PCS250 User Manual

Page 32 Module Supervision
Viewing GSM IP Information with Digiplex EVO
1) To access Master Programming, enter the [MASTER CODE] then
press [0].
2) In Master Programming, press [2] to display the PCS250 IP
information.
3) The first screen displays the PCS250 IP Address. Press [] to
access the next screen.
4) The second screen displays the PCS250 IP Port. Press [] to
access the third screen.
5) The third screen displays the PCS250 User PC Software
Password. If you press [] again, the Exit Message will be
displayed.
Viewing GSM IP Information with MG/SP / E-Series
1) Press the [] key.
2) Enter [
MASTER CODE].
3) To enter SMS Setup, press [
ARM].
4) Using the [] key, scroll up to [9] GSM IP Address and press
[
ENTER]. To return to the GSM menu, press [ENTER].
5) Using the [] key, scroll up to [10] GSM IP Port and press
[
ENTER]. To return to the GSM menu, press [ENTER].
6) Using the [] key, scroll up to [11] GSM PC Password
(Future use). To return to the GSM menu, press [
ENTER].
7) Using the [] key, scroll up to [12] Site Name. To return to
the GSM menu, press [
ENTER].
8) To exit the GSM menu, press [
CLEAR].

Paradox PCS250 Specifications

General

Communication	GSM/GPRS
Display	No
Battery	No
Camera	No
Network	GSM/GPRS
Bluetooth	No
FM Radio	No