EasyManua.ls Logo

Paragon P10 - Siting the Appliance

Paragon P10
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
P a g e | 16
P10 INSTALLATION INSTRUCTIONS
Packaging Check List
1 x Glass Panel
1 x Boxed Fuel Bed
1 x Transformer Plug
1 x RF Handset
2 x AAA 1.5V Batteries
Siting the Appliance
Regulation and warnings
This appliance must only be installed in Great Britain and Eire.
The appliance is suitable for use on natural gas only.
When fitted in the GB the fire does not normally require purpose provided ventilation
In GB it is the law that all gas appliances must be installed by a competent person GAS SAFE
registered installer, in accordance with the Current Gas Safe (installation and user) Regulations.
All relevant parts of the local and national building regulations and all relevant
recommendations of the following British standards. Failure to do so could lead to prosecution.
The following are relevant codes of practice and British Standards:-
B.S 5871
B.S 5440 Part 1 & Part 2
B.S 6891
This appliance must be installed to current versions of the above standards and include any
relevant amendments to:-
The building regulations issued by the department of the environment.
The building standards (Scotland) (Consolidated) Regulations issued by the Scottish
development office.
Eire the appliance must be installed by a competent person and installed in accordance with
the current edition of I.S 813 document gas installation, the current building regulations and the
current ETCI rules for electrical installation, if appropriate.

Related product manuals