Paragon Slimline 2 Slide - Page 4

SECTION THREE
• Place a row of 5 coals, 3 "A" and 2 "B" as
shown. Ensure these coals are supported by
the front Matrix and they rest inside the
depressions
• Place six (3 'A' and 3 'B') coals as shown.
Ensure that the 'B' coal is positioned so that
it touches the left-hand inside of the fire
casing. Ensure the coals bridge across the
existing coals and the rear matrix.
• Place four (2 'A' and 2 'B') coals on top of
the rear matrix as shown.
• Place five (3 'A' and 2 'B') coals on top of the
rear matrix as shown.
Paragon Slimline 2 Slide & 2 Slide Lo
58184