PARAMOUNT BED PY-700 Series - SPECIFICATIONS; Product Specifications Details

9
Hexagonal wrench
(6 mm)
Stand the wagon up and use the hexagonal
wrench (6 mm) to firmly secure the cap bolts that
were temporarily fixed in steps and ❹
(8 locations)
❺After standing up the wagon, align the position of
the attachment bracket holes of the middle tray
and the bolt attachment holes of the supportive bar
and use the cap bolts to fix temporarily in place.
(2 locations each on the left and right)
❻Use a hexagonal wrench (6 mm) to firmly secure
the cap bolts that were temporarily fixed in place in
steps ❷❸❹ and ❺. (12 locations)
●The recommended tightening torque
of the cap bolts is 10 N·m.
CASTERS
Locking the Caster
• Please lock all four places of casters by all
means.
• Depress the stopper to lock the caster from
swiveling and rotation.
• To unlock, please depress the upper stopper
on tiptoe.
Bolt attachment hole of supportive bar (3 stage)
Hexagonal wrench
(6 mm)
❺❻
PY-702D/E, PY-702CD/CE and, PY-712D/E
(2-Stage type)
❺
PY-703D/E, PY-703CD/CE, PY-713D/E,
PY-713CD/CE (3-Stage type)