To Next PageTo Next PageWhat to do if my Paramount Fitness EF-130P turns off and will not turn on?
If your Paramount Fitness Indoor Fireplace turns off and won't turn back on, it might have overheated, causing the thermal switch to disconnect, or your home circuit breaker might have opened. To fix this, turn the main power switch off, wait 5 minutes, and then turn it back on to reset the switch.
Why is no warm air coming out of my Paramount Fitness EF-130P Indoor Fireplace?
If your Paramount Fitness Indoor Fireplace is not producing warm air, it could be due to a couple of reasons. First, check if the room temperature is higher than the appliance's temperature setting. If it is set to room temperature, try resetting the temperature setting. Alternatively, the heater might be burnt out. In that case, inspect the burner and heater assembly and replace it if necessary.
Why does the heater in my Paramount Fitness EF-130P shut off automatically?
If the heater in your Paramount Fitness Indoor Fireplace shuts off automatically, it's likely because the room is too warm. The heater has a built-in thermostat that causes it to shut off automatically. It will also turn on automatically if the room temperature drops below the pre-set temperature.
How to fix a Paramount Fitness Indoor Fireplace remote control that does not work?
If the remote control for your Paramount Fitness Indoor Fireplace isn't working, the first thing to check is the batteries. Low batteries are a common cause. Replace the batteries in the remote control to solve this issue.
Why is the ember bed not glowing or dimming in my Paramount Fitness EF-130P Indoor Fireplace?
If the ember bed in your Paramount Fitness Indoor Fireplace is not glowing or is dimming, it's possible that the LEDs are burnt out or malfunctioning. Inspect the LEDs and replace them if necessary.
General| Brand | Paramount Fitness |
|---|---|
| Model | EF-130P |
| Category | Indoor Fireplace |
| Language | English |
Specifies required distances from the appliance to flammable materials and surfaces.
Details the essential clearances needed around the fireplace mantel for safe installation.
