To Next PageTo Next PageWhat to do if my Paramount Fitness LIF30FV Indoor Fireplace turns off and will not turn on?
If your Paramount Fitness Indoor Fireplace turns off and won't turn back on, it might have overheated, causing the thermal switch to disconnect, or your home circuit breaker might have opened. To fix this, turn the main power switch off, wait 5 minutes, and then turn it back on to reset the switch.
Why is no warm air coming out of my Paramount Fitness Indoor Fireplace?
If your Paramount Fitness Indoor Fireplace is not producing warm air, it could be due to a couple of reasons. First, check if the room temperature is higher than the appliance's temperature setting. If it is set to room temperature, try resetting the temperature setting. Alternatively, the heater might be burnt out. In that case, inspect the burner and heater assembly and replace it if necessary.
Why does the heater in my Paramount Fitness LIF30FV shut off automatically?
If the heater in your Paramount Fitness Indoor Fireplace shuts off automatically, it's likely because the room is too warm. The heater has a built-in thermostat that causes it to shut off automatically. It will also turn on automatically if the room temperature drops below the pre-set temperature.
How to fix a Paramount Fitness LIF30FV Indoor Fireplace remote control that does not work?
If the remote control for your Paramount Fitness Indoor Fireplace isn't working, the first thing to check is the batteries. Low batteries are a common cause. Replace the batteries in the remote control to solve this issue.
Why is the ember bed not glowing or dimming in my Paramount Fitness Indoor Fireplace?
If the ember bed in your Paramount Fitness Indoor Fireplace is not glowing or is dimming, it's possible that the LEDs are burnt out or malfunctioning. Inspect the LEDs and replace them if necessary.
General| Brand | Paramount Fitness |
|---|---|
| Model | LIF30FV |
| Category | Indoor Fireplace |
| Language | English |
Instructions for safely removing the appliance from its packaging and performing an initial operational test.
Guidance on properly grounding the electric appliance for safe operation and electrical protection.
Specifies required safety distances from flammable materials around the appliance.
Details required clearances around the appliance when installed with a mantel.
Procedure for safely removing and reinstalling the front glass panel of the appliance.
Guidelines for safely storing the appliance, including cord management.
Information on how to leave a review to receive an extended warranty period.
Contact information and details for customer support and warranty inquiries.
Instructions and form for registering the product to activate warranty services.
