To Next PageTo Next PageHow to fix a Paramount Fitness JR42 Indoor Fireplace remote control that is not working?
If your Paramount Fitness Indoor Fireplace remote control is not working, the most likely cause is a low battery. Replace the batteries in the remote control to resolve this issue.
How to fix ember bed that is not glowing or is dimming in Paramount Fitness Indoor Fireplace?
If the ember bed in your Paramount Fitness Indoor Fireplace is not glowing or is dimming, it's possible that the LEDs are burnt out or malfunctioning. Inspect the LEDs and replace them if necessary.
What to do if Paramount Fitness JR42 will not switch on?
If your Paramount Fitness Indoor Fireplace isn't turning on, first ensure it's properly plugged into a working 120V electrical outlet. If the issue persists, the appliance may have overheated, triggering the safety thermal switch. To resolve this, unplug the power cord, wait 15 minutes for the unit to cool down, and then plug it back in and try turning it on. If it still doesn't work, the circuit board might be damaged and require inspection and possible replacement.
Why does my Paramount Fitness JR42 Indoor Fireplace keep turning off and not turning back on?
If your Paramount Fitness Indoor Fireplace turns off and won't turn back on, it might have overheated, causing the safety thermal switch to trip. To fix this, unplug the power cord and let the appliance cool down for 15 minutes. After cooling, plug the power cord back in and try turning it on. Also, check your house circuit breaker and reset it if necessary.
General| Brand | Paramount Fitness |
|---|---|
| Model | JR42 |
| Category | Indoor Fireplace |
| Language | English |
