Paramount Fitness MP 3.5 User Manual

15
LP STEP 3: ASSEMBLE LP TO UPRIGHT
1. The leg press can be mounted to
two different locations on the
mainframe when the cable column
is not used. See pictures below.
2. Route the Leg Press cable through
the opening in the Upright frame as
shown
3. Loosely assemble ALL hardware
shown in this step.
4. After aligning all component edges
and surfaces, tighten the hardware.
The leg press can be mounted
to two different locations.
However, if the cable column
is used, the leg press must be
mounted as in Fig.2.
Fig.1
Fig.2
IMPORTANT!

Paramount Fitness MP 3.5 Specifications

General

Brand	Paramount Fitness
Model	MP 3.5
Category	Fitness Equipment
Language	English