DOC-0017-07-EN: AC20 Series - EtherCAT Option
2 (58) DOC-0017-07-EN-B 04.04.2023
1 Safety
IMPORTANT: Please read this information BEFORE installing the equipment.
1.1 Intended Users
This manual is to be made available to all persons who are required to install, configure or service equipment
described herein, or any other associated operation.
The information given is intended to highlight safety issues, and to enable the user to obtain maximum benefit
from the equipment.
Complete the following table for future reference detailing how the unit is to be installed and used.
INSTALLATION DETAILS
Model Number
(see product label)
Where installed
(for your own
information)
1.2 Application Area
The equipment described is intended for industrial motor speed control utilizing AC induction motors or AC
permanent magnet synchronous machines.
1.3 Personnel
Installation, operation, and maintenance of the equipment should be carried out by competent personnel. A
competent person is someone that is technically qualified and familiar with all safety information and
established safety practices; with the installation process, operation, and maintenance of this equipment,
and with all the hazards involved.
1.4 Product Warnings
Special attention must be paid to the information presented in warning, caution, and information notices
when they appear in this manual. Definitions of caution, warning and information notices are shown below:
Application Risk
The specifications, processes and circuitry described herein are for guidance only and may need to be
adapted to the user’s specific application. We cannot guarantee the suitability of the equipment described in
this Manual for individual applications.
To Next Page
Loading...