Parker D91VW Series - Page 9

Direct/Pilot Operated DC Valves
Series D1VW*/D*W*EE Explosion Proof Brief Operation Manual
9
Parker Hannifin Corporation
D_W_EE 5715-729 UK_EXT.indd 19.02.20
Standards, directives and provisions relating to the operation of systems in potentially explosive
areas (extract)
1999/92/EC Minimum requirements for improving the safety and health protection of workers
potentially at risk from explosive atmospheres
2004/108/EC Electromagnetic compatibility directive (EMC)
EN ISO 12100:2010 Safety of machinery – General principles for design risk assessment and risk reduction
EN 15198:2007 Methodology for risk assessment of non-electrical equipment and components
for intended use in potentially explosive atmospheres
EN 60079-0:2009 Explosive atmospheres –
Part 0: Equipment – General requirements
EN 60079-7:2007 Explosive atmospheres –
Part 7: Equipment protection by increased safety “e”
EN 60079-14:2009 Explosive atmospheres –
Part 14: Electrical installations design, selection and erection
(IEC 60079-14:2013)
EN 60079-17:2014 Explosive atmospheres –
Part 17: Electrical installations inspection and maintenance
(IEC 60079-17:2013)
EN 60529:2014 Degrees of protection provided by enclosures (IP code)
(IEC 60529:1989 + A1:1999 + A2:2013)
BetrSichV Ordinance on industrial safety and health
TRBS 2153:2009 Technical rules for operating safety
Avoiding ignition hazards as a result of electrostatic charges