EasyManua.ls Logo

Parker H Series User Manual

Parker H Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Effective: July 2018 IPDE-IOM-NEEDLE-VALVE-BALL-VALVE
Effective: REV A : July 2023
Installation and Operation Manual
Needle Valves & Ball Valves
Note - These Instructions apply to Parker Products that utilise Needle and Ball Valves such
as the ones shown above

Other manuals for Parker H Series

Question and Answer IconNeed help?

Do you have a question about the Parker H Series and is the answer not in the manual?

Parker H Series Specifications

General IconGeneral
BrandParker
ModelH Series
CategoryNetwork Hardware
LanguageEnglish

Summary

IDENTIFICATION OF HAZARDS

General Safety Precautions

List of critical safety warnings to prevent injury or damage during valve operation.

INSTALLATION

General Installation Advice

Wear PPE and ensure valves are closed before installation.

H Series Manifolds & Needle Valves Installation

Procedures for welding and reassembling head assembly for H Series valves.

OPERATION

H Series Screwed Head/Bonnet Operation

Instructions for closing and opening H Series screwed head/bonnet valves.

H Series Outside Screw & Yoke Head Operation

Instructions for closing and opening H Series outside screw & yoke head valves.

Hi-Pro Ball Valve Operation

Procedures for closing and opening Hi-Pro Ball Valves, note 90° limit.

MAINTENANCE

Related product manuals