Need help?Do you have a question about the Parker IQAN-L Series and is the answer not in the manual?
General| Brand | Parker |
|---|---|
| Model | IQAN-L Series |
| Category | Video Game Controller |
| Language | English |
Sections regarding safety, marked with a symbol in the left margin, must be read and understood by everyone using the system.
Work on hydraulics control electronics may only be carried out by trained personnel well-acquainted with the system and its safety regulations.
Protection against power supply polarity reversal is provided by an external fuse (max 3A Fast).
Yellow blinking LED indicates normal status; red blinking LED indicates error status, providing immediate diagnosis.
A comprehensive table listing symbols, pin numbers, input/output functions, and alternative naming for I/O.
Connect supply voltage to +BAT pin C1:4 through a 3A fast fuse and ensure emergency stop is accessible.
Explains assigning unique addresses and terminating the CAN-bus for proper communication between modules.
Steps to start the control system, ensuring all modules are fitted, fuses are correct, and emergency stop functions.
Ensure no one is near the vehicle, engine is off, connectors are connected, voltage is supplied, and emergency stop is functional.
Start the hydraulic pump engine, calibrate signals, adjust inputs/outputs, and check functions.
Provides a guide to error codes, messages displayed on the master, and recommended actions for troubleshooting.
Lists error codes and comments for situations involving incorrect supply voltage levels.
Details error codes and comments for issues related to the reference voltage (VREF).
Covers errors related to the module being offline, including CAN-bus issues and address errors.
To Next Page