MX 102 - MX110 User Guide
3
1. Safety Information
Important: Do not operate this equipment until the safety information and instructions in this user guide have been read and
understood by all personnel concerned.
Only competent personnel trained, qualified, and approved by Parker domnick hunter should perform commissioning,
service and repair procedures.
Use of the equipment in a manner not specified within this user guide may impair safety and invalidate your warranty.
When handling, installing or operating this equipment, personnel must employ safe engineering practices and observe all related
regulations, health & safety procedures, and legal requirements for safety.
Ensure that the equipment is depressurised and electrically isolated, prior to carrying out any of the scheduled maintenance
instructions specified within this user guide.
Most accidents that occur during the operation and maintenance of machinery are the result of failure to observe basic safety rules
and procedures. Accidents can be avoided by recognising that any machinery is potentially hazardous.
Parker domnick hunter can not anticipate every possible circumstance which may represent a potential hazard. The warnings in this
manual cover the most known potential hazards, but by definition can not be all-inclusive. If the user employs an operating procedure,
item of equipment or a method of working which is not specifically recommended by Parker domnick hunter the user must ensure
that the equipment will not be damaged or become hazardous to persons or property.
Should you require an extended warranty, tailored service contracts or training on this equipment, or any other equipment within the
Parker domnick hunter range, please contact your local Parker domnick hunter office.
Details of your nearest Parker domnick hunter sales office can be found at: www.parker.com/gsfe
To Next Page
Loading...
