Parker SciLog LabTec Series - LabTec Methadone Dispenser Accessories

16
4.1 PRINTER PORT: The LabTec Methadone can be connected to a PC for control by the
clinical software in use. An RS-232 Serial Cable (P/N 080-073) is used for this connection.
Alternatively, a USB cable (090-158) may be used.
4.2 SCALE PORTS: Not normally used by the LabTec Methadone unit. The male DB9 ports
labeled “S1”, “S2” and “S3” are RS-232 ports for electronic scales. For the LabTec,
only S1 is used. (Please do not remove the covers on the unused ports.) This port
allows you to interface with a number of different electronic scales: i.e. Mettler, Ohaus,
and Sartorius top-loading scales. The following scale cables are required:
 Mettler: PGS, PM, Viper Models: P/N: 080-067PGS
 Ohaus: GT, “Precision Advanced”, “Explorer”, “Voyager” Models: P/N: 080-066
 Ohaus: IP Series High Capacity: P/N: 080-067
 Ohaus: Adventurer Pro Series: P/N: 080-067PGS
 Sartorius: Most Series Scales: P/N: 080-068
In the LabTec Setup: Scale mode, select the scale manufacturer; the LabTec will
automatically implement the correct communications parameters. Check that the proper
communications parameters are also implemented in the scale being used.
4.3 PRESSURE SENSOR PORTS: The LabTec Methadone unit does not make use of these
jacks or Sensors.
4.4 TEMPERATURE PROBE PORT: The LabTec Methadone unit does not make use of these
jacks or Sensors.
4.5 VALVE V PORT: Not used in conjunction with the LabTec Methadone.
4.6 USB PORT: Used for connection to a PC, providing a Com Port. Can be used for data
communication as an alternative to the Printer port. The USB driver is included on the CD
that contains this manual.
4.7 ETHERNET PORT: Not utilized by the LabTec Methadone Unit.
4.8 EXTERNAL I/O CONNECTOR: Not utilized by the LabTec Methadone Unit.
Parts List: LabTec Methadone Dispenser Accessories:
400-001M 316SS Sinker: Prevents tubing from getting stuck to the inside of Methadone reservoir
400-216 Tygon Tubing: ¼ OD x 50 feet, tubing fits into RH1-CKC pump head.
400-410 Stand & Clamps: holds dispensing end of tubing.
400-492 Dispensing Tip (Fits Tygon tubing #400-216 above.)
Call Parker Sales at 805-604-3400 for a pricing on these items, or to re-order.