9
Installation of the USB Driver:
Upon connecting the LabTec to the PC via a USB cable, the following “New Hardware Wizard”
window appears. Select ‘No, not at this time” and click “Next”. The second screen appears:
Insert the CD containing the LabTec Operating Manual into the PC, choose “Install the software
automatically” and click “Next”. The following screen appears:
Choose “Continue Anyway”, and the driver will finish loading, allowing you to communicate with the
LabTec via the assigned Com Port.
By opening Windows Device Manager and clicking on the + for Ports, you can determine the Com
Port assigned to the LabTec. It will be listed as “USB SciExpert”. (COM8 as shown)
To Next Page
Loading...