EasyManua.ls Logo

Parker SciLog LabTec Series - Page 19

Parker SciLog LabTec Series
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Tubing:
#16 (1/4” OD x 1/8” ID) Food Grade Tygon tubing is normally used in this system. It can be
purchased from Parker Customer Service in boxes of 50 ft. (PN 400-216)
When asked, we recommend replacing the entire tubing set once every 6 months, and when doing
so, cut both pieces a foot longer than needed. (This can be done more frequently if the clinic wishes
to.) This allows you to remove the tubing from the pump once a month and cutting of the last 2” of it
that has been trapped inside the head. The tubing does swell over time in these conditions and will
cause under-dispensing issues resulting in problems with the calibration and accuracy of the
dispensing at the end of the day.

Related product manuals