Parker SMOG-HOG PSG - Adjusting Motor Variable Pitch Pulley; Power Pack Operation; Remote Status Panel; Power Pack Enclosure Push Rod and Grounding Bar

8
REPLACEMENT PARTS
QUANTITY
ITEM NO. PART NO. DESCRIPTIONS REQUIRED
1 02-1921 UNICELL ASSEMBLY 1
2 36-0068 IONIZER CONTACT SPRING 1
3 30-0452 CONTACT WELD NUT 1
4A 18-0674 IONIZER SUPPORT BAR (TOP) 1
4B 18-0670 IONIZER SUPPORT BAR (BOTTOM) 1
5 02-0749 IONIZER/CELL FEED THRU INSULATOR
ASSEMBLIES 2
37-0026 INSULATOR ONLY 2
6 37-0028 IONIZER STANDOFF INSULATOR 4
7 03-0559 IONIZER WIRE SPRING 20
8 03-0738 IONIZER WIRE, 10 MIL SST 10
9 30-0387 CELL CONTACT SCREW 1
10 30-0384 FLAT WASHER 1/4’’ SST 1
11 36-0012 CELL CONTACT SPRING 1
12 37-0061 CELL TRIANGULAR INSULATOR 8
13 10-0158 WIDE PLATE (GND.) 37
14 10-0157 NARROW PLATE (+/-) 38
15 36-0142 SCREW 8-32 x 1/2’’ 4
Figure 6
Unicell Electrical Alignment and Parts List