To Next PageTo Next Page
Need help?Do you have a question about the Parker VRD350 Series and is the answer not in the manual?
Explanation of the product code structure for selecting the correct amplifier.
Instructions for connecting the unit, including supply voltage and solenoid connections.
Detailed guidelines for wiring and electrical cabinet design to minimize interference.
Instructions for programming U-, S-, P-, and E-Values using the device's interface.
Methods for diagnosing system status using test sockets and internal parameters.
Overview and adjustment of S- and H-parameters for command signals and simulation.
Adjustment of P-parameters for matching amplifier to valve or drive characteristics.
Description of internal and external command signals and their additive properties.
Activation and adjustment of feedback signals for closed loop control systems.
Procedure for setting the zero point of the feedback transducer and gain.
Setting controller parameters like Kp, Ki, Kd, and T-portion for stable control.
Details on external closed loop operation and safety function activation.
Step-by-step sequence for operating with the active safety function.
Guidelines for pressure control using external sensors and proper scaling.
Operation of remote loop control, including comparator and ramp reset input.
Functionality of comparators, window settings, and output delays.
Monitoring of output stages, error signaling, and fault clearing procedures.
Pinout description for the rear connector, detailing signals and functions.
General