• Connect the aileron servo to the fuselage connector, respect the polarity.
• Insert a wing half in the fuselage.
• Insert the wing joiner tube in the wing half.
• Slide the other wing half over the tube.
• Connect the other servo to the connector, respect polarity.
• Gently pull the excessive piece of servo lead into the fuselage.
• Push both halves into the fuselage until they are rmly xed..
STEP 4
CONTROL OF THE CENTRE OF THE GRAVITY
The centre of gravity (CG) will determine how the natural forces of gravity will effect the airplane. Having
the centre of gravity too far forward or backward will cause the airplane instable. Reposition the battery
until the airplane is level.
50-60mm
To Next Page
Loading...