Need help?Do you have a question about the Parking Facilities PF6000 and is the answer not in the manual?
General| Brand | Parking Facilities |
|---|---|
| Model | PF6000 |
| Category | Automatic Barriers |
| Language | English |
Explains how safety devices like photocells and edges function.
Provides essential safety guidelines for operating the barrier.
Instructions for operating the barrier to the open position.
Instructions for operating the barrier to the closed position.
Step-by-step guide for manual barrier operation during power loss.
Guidelines for regular safety checks performed by the end user.
Details required inspections for planned preventative maintenance every six months.
List of features and operations explained during the handover process.
Documentation and manuals provided to the client at handover.
Details of the drive unit and its gearbox/motor specifications.
Identification of control panels, limit switches, safety switches, and loop detectors.
Information on pole arm adaptors.
Visual guide and key for identifying components on the control panel.
Parameters related to cycle counting and auto-close times.
Configuration for motor frequency, current, and power factor.
Parameters for torque boost and brake energisation.
Settings for selecting and programming limit switch types and positions.
Settings for opening, closing, and run timer speeds.
Parameters for mechanical and electronic limit switch operation.
Settings for safety edge evaluation, activation, and function.
Mapping functions to input terminals for various commands.
Settings for relay outputs like traffic lights and brake signals.
Configuration for expansion boards and plug-in modules.
Options for displaying diagnostic information and error codes.
Settings for operating modes and parameter adjustment.
Common messages indicating system status or wait conditions.
Status messages related to the calibration process.
Status messages during the synchronization process.
Status indicators for deadman operation modes.
Information messages during automatic barrier movement.
Messages indicating the expiration of delay timers.
Fault codes related to barrier position and run timers.
Faults related to safety interlocks and emergency stops.
Faults indicating hardware issues or overloads.
Faults related to mechanical limit switches and data transmission.
Faults indicating internal systematic or software issues.
Status and configuration of general inputs and limit switches.
Status of wireless module and loop detector inputs.
Explanation of how the barrier opens and closes.
Guide on how to program parameters using the control panel.
Wiring configurations for mechanical limits and inputs.
Jumper settings for safety edges and initial profile selection.
Steps for setting the barrier profile and initial parameters.
Guidelines for using the quick connector block for inputs.
Details on photocell wiring, output setups, and module connections.
Steps for installing and operating the loop detector module.
Configuration of dip-switches and interpretation of LED indicators.
Wiring diagrams for safety and entry loop connections.
Wiring configurations for mechanical limits and inputs.
Diagrams for mains power, motor connections, and flashing beacon.
Wiring details for the integrated loop detection card.
To Next Page