PACKAGES INCLUDE:
Force Dolly & Handle
Ball Mount: 18”, 20” or 24”
Tightening Bar
Two Hitch Balls: 2” & 2 5/16”
Thrust Washer (Puzzle)
Hardware Kit:
• 2 Handle Spring Clips
• Allen Key & Screws
• Battery Cable
IN THE BOX
ASSEMBLY
Insert the Handle into the Dolly and tighten both Allen Screws to secure it.
Plug the Handle Cable into the Port on the Dolly’s Module. Install both
Spring Clips onto the Handle for easy access to the Tightening Bar.
U1 Battery Kit: Pre-installed when purchased with a B2 or B3 Dolly.
Battery Box Kit: Mount the Plastic Battery Box with the provided Strap.
Battery Hardware & Charger Cable
(B2 + B3 Packages Only)
1
To Next Page
Loading...
