Parkit360 Force Owner’s Manual 8
Operation
Handle Control Switch:
Please note that there is no “On” indicator… as soon as the power is connected to the
Force unit, the unit is operational and ready to go.
For the following instructions, all of the directional terms used are from the point of view
of the user standing behind the unit during normal operation, for example, when we
refer to “Forward” this means that you are walking forward with the unit, which would
mean that the trailer is backing up.
The Parkit360 Force unit is controlled using a single three-position switch. The switch
remains in the neutral position unless Forward or Reverse is pressed.
www.parkit360.ca
To Next Page
Loading...
