■ 2
│
GB
│
CY
PAKSP 20-Li A1
CORDLESS CROSS CUT MITRE SAW
PAKSP 20-Li A1
Introduction
Congratulations on the purchase of your new appliance. You have chosen
a high-quality product. The operating instructions are a part of this product.
They contain important information about safety, usage and disposal.
Before using the product, please familiarise yourself with all operating and
safety instructions. Use the product only as described and for the range of
applications specified. Please also pass these operating instructions on to
any future owner.
Intended use
This appliance is intended for cutting wood, wood-like products or plastics.
It may not be used for cutting ferrous materials such as rods, bars, screws,
etc.
Any other usage or modification of the appliance is deemed to be improper
and carries a significant risk of accidents.
The appliance should not be used for industrial purposes.
Features
On/Off switch
Handle
Motor unit
Spindle lock
Locking screw for the bevel angle
Locking screw for the table
Workpiece rest
Screw for the workpiece rest
Table
Display arrow on table
- Mitre scale
3 Adjustable fence
! Socket head screw
. Blade guard
0 Release button
Figure A
6 Saw blade
1 Tensioning clamp
17a
Setting screw for tensioning clamp
% Drill holes for workpiece rest
+ Drill holes
, Mounting screw
Clamping flange (external)
Figure B
/ Handle
Dust extractor connection
" Dust collection bag
24a
Fastening clips
# Transport restraint
$ Clamping screw
& Threaded rod
Figure C
' Bevel scale
( Bevel indicator
Figure D
5 Battery pack*
4 Release button
Battery charger*
2 Battery display LED
Battery charge level button
* Red control LED
) Green control LED
Hex key
Package contents
1 cordless cross cut mitre saw
1 tungsten carbide saw blade Ø 210 x 2.0 x Ø 30 mm 48Z
(pre-assembled)
2 tensioning clamps
1 dust collection bag
1 hex key
2 workpiece supports
1 set of operating instructions
To Next Page
Loading...
Need help?
General
