Parkside Performance PKHAP 20-Li C3 User Manual

Smart battery support8
This appliance supports advanced functions when using special smart batteries. For more infor-
mation, please refer to the accompanying material provided by the respective manufacturer.
If smart battery functions are supported, the Ready2Connect LED8 lights up in the following
manner:
Ready2Connect LED
Connect the battery pack
LED flashes 3 times
Connect to the app
LED stays on
Not connected to the app
LED stays off
Tool in update mode
LED flashes continuously
Tool update successful
The LED flashes for 5 seconds
Tool update failed
LED flashes rapidly alternately
Podrška za pametnu bateriju8
Ovaj uređaj podržava napredne funkcije kada se koriste posebne pametne baterije. Dodatne
informacije potražite u popratnom materijalu dotičnog proizvođača. Ako su podržane funkcije
pametne baterije, Ready2Connect LED8 svijetli na sljedeći način:
Ready2Connect LED
Spojite paket baterija
LED treperi 3 puta
Povežite s aplikacijom
LED trajno svijetli
Nije povezano s aplikacijom
LED ne svijetli
Alat u režimu ažuriranja
LED trajno treperi
Uspješno ažuriranje alata
LED treperi 5 sekundi
Neuspjelo ažuriranje alata
LED naizmjenično brzo treperi

Parkside Performance PKHAP 20-Li C3 Specifications

General

Battery Voltage	20 V
Max. Drilling Diameter in Wood	30 mm
Max. Drilling Diameter in Steel	13 mm
Max. Torque	60 Nm
No-load Speed	0-500 / 0-2000 rpm
Battery Type	Li-Ion
Chuck Size	13 mm
Chuck Capacity	13 mm
Torque settings	20