Parkside Performance PKHAP 20-Li A1 User Manual

CORDLESS HAMMER DRILL 20V PKHAP 20-Li A1
AKKU-KOMBIHAMMER 20 V
Originalbetriebsanleitung
IAN 364899_2101
CORDLESS HAMMER DRILL 20V
Translation of the original instructions
CIOCAN COMBI CU
ACUMULATOR 20 V
Traducerea instrucţiunilor de utilizare original
ΕΠΑΝΑΦΟΡΤΙΖΟΜΕΝΟ
ΚΡΟΥΣΤΙΚΟ ΔΡΑΠΑΝΟ 20 V
Μετάφραση των αυθεντικών οδηγιών λειτουργίας
AKU KOMBINIRANI ČEKIĆ 20 V
Prijevod originalnih uputa za uporabu
AKU KOMBINOVANI ČEKIĆ 20 V
Prevod originalnog uputstva za upotrebu

Parkside Performance PKHAP 20-Li A1 Specifications

General

Battery Voltage	20 V
Battery Type	Lithium-Ion
Chuck Capacity	1.5 - 13 mm
Max. Drilling Diameter in Wood	38 mm
Max. Drilling Diameter in Steel	13 mm
Max. Torque	60 Nm
Battery Capacity	2.0 Ah
Torque Settings	21 + 1 drill setting + 1 impact drill setting

Summary

General power tool safety warnings

Work area safety

Covers safety aspects related to keeping the work area clean, well-lit, and free from explosive atmospheres.

Electrical safety

Details precautions for electrical safety, including plug matching, avoiding body contact with earthed surfaces, and outdoor use.

Personal safety

Advises on personal safety measures like staying alert, using PPE, and preventing unintentional starting.

Power tool use and care

Guides on correctly using the tool, maintaining it, and storing it safely to prevent accidents.

Use and handling of the cordless electrical power tool

Provides instructions for charging, using, and handling the battery pack and the cordless tool safely.

Appliance-specific safety instructions for hammer drills

Provides safety advice specific to hammer drills, including hearing protection and dust masks.

Safety guidelines for battery chargers

Outlines safety rules for using battery chargers, including supervision for children.

Before use

Charging the battery pack

Attaching/disconnecting the battery pack to/from the appliance

Checking the battery charge level

Use

Additional handle

Depth stop

Operation

Select operating mode

Details how to select the desired operating mode (Drilling, Hammer drilling, Chiselling) using the function selector switch.

Adjusting the chisel position

Preselecting the rotation speed

Switching on and off

Changing the direction of rotation

Maintenance and cleaning

Disposal

Kompernass Handels GmbH warranty

Warranty period and statutory claims for defects

Scope of the warranty

Warranty claim procedure

Service